AI Vision Units
There are four galvanically isolated synchronization inputs. These inputs can be connected directly to the system for voltages up to 24V DC. An external resistor is not necessary.
There are two galvanically isolated synchronization outputs. These outputs can be used, for example, to trigger a camera or a slave lighting controller.
Each of the six channels can be individually configured to output pulses based either on a discrete external trigger signal or an internally-generated trigger. A wide variety of internal triggers can be produced by configuring the internal pulse shaping logic.
This logic includes eight pulse generators and several multiplexers. The pulse generators allow pulse delay and width control down to 1μsec resolution. The multiplexers, organized as two routing matrices, allow for the flexible selection of the pulse generators inputs and outputs.
An output protection circuit, used to prevent the lighting from getting overheated and thus damaged, is also included in this logic.
The controller has two independent 24V DC supplies for the power and logic sections. This choice is aimed at increasing versatility. Supply to the logic section must always be present, while supply to the power section can be cut off at any time. Supply to the power section can be removed to protect the end user from photo-biological hazard and other hazardous situations that may happen during fault conditions.
These two supplies can be connected together if convenient.
The controller has an internal 24V to 48V DC step-up converter. This widens the range of lighting systems the controller can drive.
The controller can be quickly configured using an easy-to-use configuration software (which can be downloaded from our web site). The controller implements a subset of the Modbus RTU slave protocol and, as such, can also be configured and managed by any programmable logic controller (PLC) with a proper interface.
All the settings are stored in non-volatile memory; the controller will retain these settings even when the supply is removed.
The controller is housed in a small, compact unit with DIN rail mounting.
For in-depth documentation please refer to the product manual.
LTDV6CH can be configured via RS485. You can either download and use our free LTSW software to configure the controller from your PC or directly send low-level commands from a PC using the Modbus/RTU slave protocol (all the Modbus function codes supported by the controller are listed in the manual available online).
The LTSW software offers a very intuitive and graphical user interface where you can:
To use LTSW configuration software your PC must have a native RS485 communication interface or a suitable RS485/USB converter must be used (PN: ADPT001) .
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Main control panel of configuration software
이 제품에 대한 견적요청 및 더 많은 정보를 위해서는 아래의 서식을 완성해 주십시오. 24시간 이내에 저희 엔지니어가 답변해 드리겠습니다.
* 양식을 빠짐없이 작성하셔야 합니다.
* After submit we'll ask you to check your consense to use Your data
Please, insert a valid E-mail and accept conditions.
With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)
Opto Engineering Copyright © 2015 - 2018 | P. IVA 02011230204 | All rights reserved
Design & development by Opto Engineering
→ SEO and consulting by Dipiemme Studio